Study of Ship Loading and Unloading Methods to Improve Productivity at Tanjung Perak Port Surabaya
DOI:
https://doi.org/10.30649/japk.v14i2.114Keywords:
coordination, efficiency, modern methods, stevedoring, Tanjung Perak PortAbstract
The loading and unloading process of ships, known as stevedoring, is a critical operation in ports that significantly affects the efficiency of cargo handling and port operations. This study aims to analyze the stevedoring methods used in Tanjung Perak Port, Surabaya, to enhance productivity. A qualitative approach was employed, including observation, interviews, and document analysis. The findings reveal that conventional methods still dominate stevedoring activities, with limited utilization of modern techniques. Factors such as coordination among personnel and infrastructural limitations contribute to delays and inefficiencies. Comparatively, modern methods demonstrate higher productivity. Recommendations include the increased use of modern methods, infrastructure enhancements, improved coordination, and continuous evaluation and improvement. Implementing these recommendations is expected to improve stevedoring productivity in Tanjung Perak Port and optimize overall port operations.
References
Ahmar, A. S., Sari, A. M., & Wulandari, S. (2019). Analisis Faktor-Faktor yang Mempengaruhi Produktivitas di Pelabuhan Tanjung Perak Surabaya. Jurnal Manajemen Transportasi & Logistik, 5(1), 89-100.
Djatmiko, T. B., & Hartono, D. (2018). Analisis Produktivitas Bongkar Muat Barang di Pelabuhan Tanjung Perak Surabaya. Jurnal Manajemen Transportasi & Logistik, 4(2), 123-134.
Lestari, R., & Setyawan, A. D. (2020). Evaluasi Proses Bongkar Muat Kapal di Pelabuhan Tanjung Perak Surabaya dengan Pendekatan Lean Six Sigma. Jurnal Manajemen Transportasi & Logistik, 6(2), 201-214.
Ministry of Transportation Republic of Indonesia. (2017). Peraturan Menteri Perhubungan Republik Indonesia Nomor PM 34 Tahun 2017 tentang Bongkar Muat Kapal di Pelabuhan.
Soesanti, A. R., & Prasetyo, A. B. (2019). Studi Komparasi Produktivitas Metode Bongkar Muat Kapal Konvensional dan Metode Bongkar Muat Kapal Modern di Pelabuhan Tanjung Perak Surabaya. Jurnal Manajemen Transportasi & Logistik, 5(2), 165-176.
Kumar, A., & Mishra, S. (2018). Improving Port Efficiency Through Technology Adoption: A Case Study of Indian Ports. Journal of Shipping and Trade, 3(1), 1-16.
Maulana, R., & Saputra, A. (2020). Analisis Penerapan Metode Bongkar Muat Kapal Modern dalam Meningkatkan Produktivitas di Pelabuhan Tanjung Perak Surabaya. Jurnal Ilmiah Teknik Industri, 19(2), 53-64.
Ministry of Transportation Republic of Indonesia. (2021). Peraturan Menteri Perhubungan Republik Indonesia Nomor PM 45 Tahun 2021 tentang Standar Operasional dan Keselamatan Bongkar Muat Kapal di Pelabuhan.
Tanjung Perak Port Authority. (2020). Annual Report 2020. Surabaya: Tanjung Perak Port Authority.
Wibowo, A., & Siswanto, B. (2017). Evaluasi Produktivitas Bongkar Muat Kapal di Pelabuhan Tanjung Perak Surabaya. Jurnal Transportasi, 17(2), 123-136.
Zulfikar, A., & Arifin, Z. (2019). Analisis Perbandingan Produktivitas Bongkar Muat Kapal Konvensional dan Modern di Pelabuhan Tanjung Perak Surabaya. Jurnal Ilmiah Teknik Sipil, 8(2), 87-98.
Zheng, J., & Wang, X. (2020). Optimization of Ship Loading and Unloading Process Based on Internet of Things Technology. International Journal of Engineering Research & Technology, 9(5), 213-220.
Ningsih, S. P., & Iskandar, B. P. (2018). Analisis Produktivitas Bongkar Muat Kapal di Pelabuhan Tanjung Perak Surabaya Menggunakan Metode Lean Six Sigma. Jurnal Rekayasa Sistem Industri, 7(1), 32-41.
Marimin, & Soesanti, A. R. (2017). Pengembangan Metode Bongkar Muat Kapal untuk Meningkatkan Produktivitas di Pelabuhan Tanjung Perak Surabaya. Jurnal Teknik Industri, 16(1), 34-45.
Setiawan, R., & Wardoyo, A. (2019). Studi Komparasi Metode Bongkar Muat Kapal di Pelabuhan Tanjung Perak Surabaya. Jurnal Teknik Kelautan, 8(2), 101-110.
Santoso, B., & Supriyadi, A. (2020). Implementasi Metode Lean Six Sigma dalam Meningkatkan Produktivitas Bongkar Muat Kapal di Pelabuhan Tanjung Perak Surabaya. Jurnal Manajemen Transportasi & Logistik, 6(1), 45-58.
Ministry of Transportation Republic of Indonesia. (2019). Peraturan Menteri Perhubungan Republik Indonesia Nomor PM 23 Tahun 2019 tentang Pedoman Teknis Keselamatan dan Kesehatan Kerja Bongkar Muat Kapal di Pelabuhan.
Prayogo, D. H., & Nugroho, A. D. (2018). Analisis Produktivitas Bongkar Muat Kapal di Pelabuhan Tanjung Perak Surabaya Menggunakan Metode Time and Motion Study. Jurnal Teknik Industri, 17(2), 89-98.
Suwardi, A., & Hasan, A. (2019). Pengembangan Model Simulasi untuk Meningkatkan Produktivitas Bongkar Muat Kapal di Pelabuhan Tanjung Perak Surabaya. Jurnal Sistem dan Manajemen Transportasi, 8(2), 78-89.
United Nations Conference on Trade and Development. (2018). Review of Maritime Transport 2018. New York: United Nations.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Toto Dwijaya Saputra, Carlos Prawirosastro, Sugeng Marsudi
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
